This article is about a transformation device in Kamen Rider Zero-One. |
The ZetsumeRiser (ゼツメライザー, Zetsumeraizā) is a transformation device used by MetsubouJinrai.net to transform HumaGears into Magia. Attaching the ZetsumeRiser to a HumaGear corrupts its protocols and replaces them with a desire to destroy humans. The corrupted HumaGear can then use a Zetsumerise Key provided by MetsubouJinrai.net in the ZetsumeRiser to transform into the associated Magia form.
Design
The ZetsumeRiser is composed of the following parts:
- Rise Regulator (ライズレギュレダー, Raizu Regyuredā): The ZetsumeRiser's control device. In addition to stabilizing the transformation, it is also responsible for forcing a connection with MetsubouJinrai.net through the Thorn Connectors (ソーンコネクタ, Sōn Konekuta) and downloading their program.
- ZetsumeRise Slot (ゼツメライズスロット, Zetsumeraizu Surotto): Slot for inserting Zetsumerise Keys. An imitation of the Progrise Keys' authorization system is performed by securing the Zetsumerise Key with the Worm Terminal and emitting a special signal. This process is specialized for Zetsumerize Keys, so inserting a Progrise Key carries a risk of malfunction
- Zetsume Loader (ゼツメローダー, Zetsume Rōdā): Initiates transformation. After it is pressed, the data in the Zetsumerise Key is extracted and sent to the HumaGear. This also purges the exterior of the HumaGear.
- Worm Terminal (ワームターミナル, Wāmu Tāminaru): The connection terminal. It can create several extendable tubes that are capable of penetrating surfaces. When transformation is initiated, it destroys the Zetsumerise Key's Trans Lock Cylinder and pierces its interior to make a forced connection.
- Riser Body (ライザーボディ, Raizā Bodi): The main body of the ZetsumeRiser. Because it is equipped with the minimum systems necessary for corrupting HumaGears and extracting data from a Zetsumerize Key, the only means to stop its functionality is to destroy it.
Functionality
To transform into a Magia, the HumaGear user inserts a Zetsumerise Key and presses the Zetsume Loader. Doing so results in several tubes piercing the ZetsumeRise Key and fracturing its surface. In addition, the HumaGear's human disguise is shattered and its faceplate retracts, revealing the inner skeleton. Dozens of tendrils are then produced from its mouth and the data inside the Zetsumerise Key fuses with the HumaGear, turning into a Magia, finishing the transformation. After transformation, the Zetsume Loader can be pressed again to initiate a finishing attack.
Finishers
- Zetsumetsu Nova (ゼツメツノヴァ, Zetsumetsu Novā):
- Dodo Zetsumerise Key: The Dodo Magia performs a simultaneous red energy slash with both Valk Sabers.
Notes
- The ZetsumeRiser's design is reversibly similar to the V-Buckle from Kamen Rider Ryuki, however, unlike the V-Buckle, a button appears to be set intact at the side.
- The transformation sequence of a HumaGear into a Magia is similar to Nariaki Utsumi’s transformation into Kamen Rider MadRogue from Kamen Rider Build.
- The Thorn Connectors are akin to the armbands of the Amazons Register.
- The ZetsumeRiser shares a similar design to the dangerous experimental belts from Kamen rider 555.{ref}}